We have recently placed our “official” company patch for sale on our website. The patches are $9 each, plus $2 S&H.

We will be donating $2 from each patch to the Halton Down Syndrome Society in Oakville, Ontario. As some may know, one of Andrew’s sons has Down Syndrome, and this is the best way that we know to support the cause. Patches will shipping approximately March 15th (at the latest).

We are also in the process of designing baseball caps. An additional $2-$3/per ball-cap will be donated to the Halton Down Syndrome Society.

T-shirts are right around the corner as well. The artwork is being finalized as we speak.  There will be two options for t-shirts.  We will be donating $2.50 per shirt to MDA (Muscular Dystrophy Association). This donation also holds special meaning. As most of you know, my brother’s son, Carson (my nephew) was diagnosed with MD last year. He shows no symptoms now, but we are going to aggressively support both causes on any front that we can!

So if you have time and you are interested, please feel free to head to “the store” on our website and pick up a patch: http://brotherhoodinstructors.com/store.html.

Thank you for your time,

Nate DeMarse
Co-owner, Brotherhood Instructors, LLC.
ndemarse.broinstructors@gmail.com

It is important to keep in mind that some departments in the United States respond with only ONE FIREFIGHTER on a truck company.

In our opinion, this is a near-criminal act that is committed by the penny-pinchers at city hall.  However, it is reality that this scenario occurs.

This is just one tool for the tool-box concerning a one-firefighter ladder raise.  Feel free to comment or question below.

-

-

-

-

-

-

-

-

-

-

This flyer was created to explain a few of the tips, techniques and tasks that the members of your department will receive when Brotherhood Instructors, LLC conducts an 8-hour class at your department.  All of the needed information is on the flyer below (click the photo for a larger pdf).  At the “Basic Forcible Entry Operations” level class we also discuss roll-down gates and demonstrate methods for defeating slide-bolt locks.

Up to 40 members trained per day, no enrollment or payment worries on your end AND………….

EVERYONE performs ALL of these tasks!

Hosting an open-enrollment class for your mutual aid organization, chief’s association or region has NEVER been so EASY!

Contact us at info@brotherhoodinstructors.com for more information on hosting your class.  We can provide open-enrollment training for Forcible Entry, VES, Roof Operations, Search operations and Engine Company Operations.  *Now booking summer and fall 2009 dates.

For Facebook users, we invite you to join our “Brotherhood Instructors, LLC.” Facebook group.  We have over 210 members and counting.  We will post upcoming classes & enrollement information, class photos and more.  Welcome to the group!

Rex Tool Modification – Part 2

In our May 2008 Online Drill (http://brotherhoodinstructors.com/wordpress/?p=81) we discussed how a standard Rex Tool could be modified to allow an under-staffed fire company to carry a through-the-lock tool, yet still carry their primary set of forcible entry tools (axe, halligan, hook, maul, etc.). The tool that was formed is now known as The Morris Tool, and sold commercially as “The Lil Rex” available through Firehooks Unlimited (http://www.firehooksunlimited.net/rex.html). After carrying the modified Rex Tool for several years, I began to debate how often I carried the tool in comparison to how many cylinders I had pulled. I thought, since I am carrying this thing around, how can I get more use out of this tool?

The Morris Tool Wedge

I began placing a Morris Tool onto the pike of the Halligan. This allows me to efficiently carry a lock-pulling tool, the axe and Halligan tool at the same time. When I encounter a forcible entry operation, I remove the Morris Tool from the pike of the Halligan and place it on the floor near door. After the door has been opened, the lock-pulling tool can be used as a simple door chock. The tool is naturally shaped as a wedge, and its weight proves to be very effective. A second advantage of this wedge-shaped tool is to use it to hold purchases during conventional forcible entry operations (similar to an axe blade). Carrying the Morris Tool married with the “Irons” has yet another advantage; it is not in one of your pockets, weighing you down for everyday operations. Tools located in your pockets sometimes remain unused, and become an after-though of many operations. By placing this tool in front of you, on the pike of the Halligan it keeps the tool in your view and in your mind when a use surfaces.

The Morris Tool Hinge Hanger

While further exploring options to make the above tool slightly more functional, an idea surfaced in my head. I decided to slightly modify the tool further to add a “hinge-hanger” device. Hinge-hanger type door chocks have been in use for several years and they are found in all shapes and sizes. Basic principles of a hinge-hanger device include an object being placed into a door jamb to chock the door open. To hold the chock on a hinge, a “U-shaped” piece of metal or plastic hooks or hangs over the door hinge. This prevents the chock from becoming dislodged as members pass through the door.

I applied the basic “hinge-hanger” idea to the Morris Tool. Modifying the tool was a relatively simple process. I bent a simple piece of round steel stock and welded the bent stock onto the pike-bracket of the Morris Tool. Once this simple modification was completed, it is now useful as a hinge-hanger device. I highly recommend welding or painting your name and/or company identification on the tool. By adding your identification, this small tool is less likely to “grow legs” at the very first fire you deploy it.

This is a very simple modification that can be completed in-house. It allows the tool to become more versatile and allows today’s under-staffed companies to carry a through-the-lock tool that may otherwise be left on the rig.